Palletizing robot for maintenance
DANBACH ROBOT

---

How to maintain the palletizing robot? The purpose of the maintenance palletizing robot is to prevent the occurrence of problems and increase the service life of the palletizing robot. In the production, the palletizing robot needs proper maintenance, and the palletizing robot has superior performance. It is also convenient to use.

But it still requires basic maintenance work for maintenance. So how do you maintain and maintain the palletizing robot?

1. Regularly clean up the garbage. When the palletizing robot is in operation, it will inevitably produce garbage or debris. If these items are not cleaned up in time, they may be stuck in the palletizing machine, so it is necessary to clean the garbage regularly to maintain the palletizing. The normal operation of the robot.

2. Clean up water stains in time. Since the palletizing robot needs to run in a dry environment, it is recommended that the palletizing robot be installed in a place where it will not rain. If water stains are found on the machine during operation, the machine should be shut down immediately. cut off the power supply, clean up the water stains in time, and then start the palletizing robot after cleaning.

3. regular lubrication, the degree of lubrication between the parts will increase the wear, easy to cause damage to all parts, so you need to regularly add lubricants to each part, in particular, the parts that are connected to each part.

When performing the lubrication of the palletizing robot parts, be careful that some parts cannot be lubricated, otherwise problems will occur.

Previous：How does the AGV car achieve wireless communication?
next：The use and characteristics of the palletizing robot

you may also like / More Like

• Automatic lifting the AGV2018-12-10
• Laser-guided forklift the AGV2018-11-19
• Unidirectional roller AGV2018-07-14
• Towing AGV vehicle2018-07-14